- Being close to nature, you can purify the air and make full use of space to keep the crops out of the soil.
- We have timeable circulatory system: The default setting of the timer allows the pump to work for 5 minutes every 30 minutes to achieve NFT. Not only make the pump more durable and save nutrient solution, but also make the vegetables grow better!
- Only need nutrient solution, no odor, very clean. It is easy to take care of, no arable land, clear weeds, save time and effort.
- We use 2.5’’(6.3cm) large diameter tube, enough to grow most of the vegetables.
- We teach hydroponic cultivation for beginners and enthusiasts to learn. It’s very simple.
Details: Design Principle:
1.Timeable circulatory system: The default setting of the timer allows the pump to work for 5 minutes every 30 minutes to achieve NFT. Not only make the pump more durable and save nutrient solution, but also make the vegetables grow better!
2.The unique inner plug design is used in the piping system. The inner plug is a PE material of food-grade. The design makes the entire piping system S-flow. The drop in water increases the dissolved oxygen in the water.
Preparation before hydroponics:
First prepare seeds, nutrient solution and a bucket of about 5L.Seeds can choose cabbage, lettuce, coriander, celery and other leafy vegetables.
ou can copy this link to see the tutorial: https://www.youtube.com/watch?v=7EUf43WaTqg
The hydroponic equipment is installed without glue, but must be installed in accordance with the installation instructions.
You need to prepare around 10 liters tank, we advice you choose a non-transparent and covered tank. You also need to provide a power supply.
Place hydroponics equipment under the sunny place to lighted at least 4 hours a day, to avoid vegetables in insufficient light impact malnourished.
Hydroponic Holder and Planting Pipe
Timer * 1
12V Water Pump * 1
Adapter * 1
Planting Basket * 54
Planting Sponge * 54
Planting Course * 1
Installation Instructions * 1
Tweezers * 1
Hose * 1
1.Timer: After the adapter, timer, and pump are connected, the adapter is plugged in and the timer can be used. If the switch time is adjusted and it is confusing, you can unplug the adapter and plug it in again. The timer will return to the default again: work for 5 minutes, stop for 30 minutes.
2.The water pump may become slower after 3-4 months of operation. In this case, the water pump needs to be disassembled to clean the rotor.