TOPCHANCES 18 kg/h 3Pcs 10 Head Ultrasonic Mist Maker Fogger Air Humidifier w/ 1050W Transformer Accessories Fountain Pond Atomizer for Greenhouse Hydroponics Garden/Lawn/Pond 220V

Brand: TOPCHANCES

Features:

• Waterscape pool manufacturing fogger.
• Spinning humidification.
• Mushroom humidification.
• Greenhouse flowers humidification.
• Printed Electronics humidification.

Details: Description:
1. When using a nebulizer, it must be equipped with a power supply .
2. Nebulizer contact power supply, the nebulizer flat on the water, the atomization head up and fully immersed in the water, before opening work, the nebulizer power work, to avoid the water and upside down to take Atomizer to avoid damage.
3. The water level above the atomizer sensor about 1cm. Fog effect is good, the water is too deep to be equipped with buoys.
4. Nebulizer fog generated by the fan to be excluded from the water to avoid the fog caused by water temperature rise, shorten the life of the atomizer.
5. When multiple nebulizers are placed in one container (no more than 1 M apart), the nests of the nebulizers need to be conductive to each other to prevent galvanic corrosion of the nebulizer housing and damage to the nebulizer.
6. Atomizer will accumulate scale on the surface of the shell and atomizer after working for a long time, which will affect the life and atomization effect. Therefore, it is recommended to clean the atomizer once every half a month. It is recommended to gently scrub with soft cloth when cleaning Rinse with water.
7. When the nebulizer is working (about 3000 hours), the life of the atomizer is weakened and the amount of fog is reduced.
8. Nebulizer installation process to avoid damage to the water level switch, so as to avoid malfunction of the water level switch cause the atomizer out of control, will result in atomization film dry, serious damage to the nebulizer.
9. When you stop using the nebulizer, disconnect the power supply before removing the nebulizer from the water