Electric Speed Controller, Spark-Proof Switch Power Supply Thermal Silica Gel Heat Sink Single Drive v6 for Skateboards with Waterproof Aluminum Shell LED Switch DC8-60V

Brand: ViaGasaFamido

Features:

• -PCB adopts immersion gold thickening process, designed with 6-layer PCB LAYou, each layer of copper foil thickness is 3OZ.Immersion gold sunroof in key parts of PCB increases heat dissipation and over-current treatment process, which makes the overall effect better.
• -A spark-proof switch function is added to the front of the power supply to protect the power contact and the electronic components of the integrated circuit to avoid sparks that may cause explosion.Use MIC5219-3.MY instead of LM3671 chip to increase the current from 600MA to 500MA x 2=1000A to obtain a more stable current output.
• -A waterproof aviation aluminum alloy shell is added, the thermal silica gel is matched with the heat sink to enhance the heat dissipation performance of the ESC. The shell surface is anodized to prevent scratches.
• -In order to better deal with the high current GND and the mutual interference between the GND of the MCU circuit and the GND of the NRF circuit, we added three Ω resistors to better achieve the filtering effect.
• -Added two IN5819 diode rectifiers to achieve 3.3V short circuit protection, replace C9 2.2uF on the capacitor with 10uF, and add a 4.7uF filter capacitor.

Details: Specification:
Item Type: Electric Speed Controller
Material: Waterproof aviation aluminum alloy + thermal silica
Model: Single drive v6 with shell
The firmware version of FSESC6.6 is VESC_default_no_hw_limits, which is compatible with for Benjamin VESC TOOL and can be used for models, multi-axis aircraft, electric vehicles, electric skateboards, smart cars, robots and simple industrial position control.
Specification: 
Hardware: V 6.6
Firmware: Latest firmware version
Voltage: 8V-60V (3S to 12S LiPo safety)
Peak voltage must not exceed 60V
Current: Continuous 60A, instantaneous current 150A. The value depends on the temperature and air circulation around the device
5V 1.5A output for external electronic equipment
3.3V 1A output for external electronic equipment
Mode: DC, BLDC, FOC (sine waving)
Supported Sensors: ABI, HALL, AS5047
Motor Wire: 12AWG
Includes spark switch
Includes waterproof aluminum box
Size: Approx.100mm / 3.9in
92mm / 3.6in
22.5mm / 0.9in
75mm / 3in
67.5mm / 2.7in
73.5mm / 2.9in 

Package List:
1 x Electric Speed Controller
1 x User Manual 
1 x USB Cable

Note:
By default, the LED button has been inserted into the switch at the factory, please do not turn on the power when the LED button is not connected