What to Look for When Choosing a Hot Tub

It is possible to choose from a variety of hot tub models, based on your installation alternatives and financial constraints. In-ground hot tubs, also known as spas, are typically built adjacent to or close to an in-ground swimming pool in order to maximize their use. The cost of installing an in-ground hot tub is not inexpensive, but it gives the greatest variety of possibilities in terms of materials, sizes, forms, and amenities.

The most common kind of portable hot tub is a free-standing full unit that may be constructed of a number of materials. They are normally constructed as a single piece cast from a mold, or as a shell and cabinet combination. Small two-person soakers to larger six- or eight-person soakers are available in this category of hot tub.

Portable hot tubs, such as inflatable hot tubs, are a sort of portable hot tub. These hot tubs, which are designed to be simply put up and taken down, may be used both outdoors and inside. They are sometimes referred to as “plug-and-play” hot tubs since they need just a 110V electrical outlet to operate. They, on the other hand, are not normally effective at temperatures below 40 degrees Fahrenheit.

Size

The dimensions and seating capacity of a hot tub define the overall size of the tub. If you have a limited amount of available space or have a certain location in mind for your hot tub installation, thoroughly examine the dimensions of any model you are considering. When it comes to seating capacity, hot tubs are typically designed to accommodate two to six people, while smaller single soakers and bigger party tubs are also available.

Material

Because in-ground hot tubs are often custom-built, the materials used in their construction might vary depending on your builder’s recommendations. In-ground hot tubs are often made of cement, fiberglass, and gunite, among other materials.

Fiberglass, acrylic, and polyethylene are popular materials used in the construction of portable hot tubs. Fiberglass tubs are quite affordable, but they are also rather hefty. Acrylic hot tubs, which are becoming more popular on the market today, are lightweight and durable, although they are susceptible to scratching. Both fiberglass and acrylic hot tubs will often have a cabinet made of wood or plastic that will house the tub insert, mechanics, and electronics, among other things. Hot tubs made of polyethylene are also quite common. For example: As a thermoplastic polymer, this material is frequently used to construct one-piece hot tubs that are cast from a mold.

Inflatable hot tubs are constructed of heavy-duty plastic and include air chambers that fill with air to keep the tub’s shape and structure intact.

Options not included in the base price

Choose a hot tub model that has extra amenities such as specialized jets, integrated lighting, and speakers to make your hot tub experience even more pleasurable. Although the options differ from manufacturer to manufacturer and model to model, they can all help to improve the comfort and ambiance of your hot tub experience.

A hot tub cover is another thing that is often mentioned as an optional feature but is more often than not regarded a must-have in the end. This component is required for the majority of portable hot tubs, however it is not usually included in the purchase price. The cover will aid in regulating the temperature of the water, hence saving on energy use. Additionally, a cover prevents leaves and other debris from falling into your hot tub, reducing the number of maintenance duties and the amount of time spent on them.

What is the best way to set up a hot tub?

Setting up your hot tub for the first time isn’t quite as difficult as it may seem at first. Provided that the proper electrical outlet (110V or 240V) is available, as well as an even level surface (preferably concrete or a specially designed hot tub pad), setting up a hot tub is as simple as having it delivered to your yard, removing it from its delivery container, and filling it with water.

If you have an inflatable hot tub, you should take additional precautions to ensure that there are no things on the ground that might puncture the lining of the tub. Remove any pebbles, sticks, or other debris from the area around the hot tub before inflating it. It is common for inflatable hot tubs to come with a ground cover, which acts as an extra layer of insulation and protection. However, there is no alternative for doing a thorough site study before to installation.

Before you pull out the hose, be sure the electricity to the circuit in your breaker box has been turned off. Cleaning the hot tub using a moderate, nonabrasive solution is recommended. Check to verify that all of the jets and knobs are in their proper positions. Install the skimmer and filter after opening the gate valves and closing the drain valves. After that, fill the tub with water by using a yard hose. Power should be restored to the breaker. In order to use the hot tub, turn it on and prime the pump (this will normally be an option on the hot tub’s control panel). Finally, set the hot tub to the temperature you choose and begin heating the water inside before adding chemicals to the water to ensure good cleanliness and water upkeep.

How frequently should a hot tub be cleaned and serviced?

Draining and cleaning your hot tub once every three to four months is generally advised; however, this might vary depending on how often you use it. Draining the hot tub and scrubbing it with a nonabrasive home cleaner or hot tub cleanser, as well as white vinegar, diluted bleach solution, or an all-purpose nonabrasive household cleaner are all steps in a thorough hot tub cleaning (consult manufacturer guidelines for specific cleaning product recommendations). Remove any grime or bacteria from the shell, seats, and jets by wiping them down thoroughly. To prevent chemical contamination, thoroughly rinse and dry the tub with a towel after each use. Fill the tub halfway with water.

In addition, you should remove the filters from time to time and spray them with a garden hose or hot tub cleanser to clean them. Before reinstalling, thoroughly rinse the system. This should be done more frequently—even once a week for regular hot tub users—to keep the tub clean.

When it comes to a hot tub, what chemicals do you need?

Hot tubs must be cleaned on a regular basis in order to preserve safe, clean water and optimal operation of the system. Preventive maintenance includes testing your water and keeping certain hot tub chemicals on hand:

pH adjusters are substances that lower the pH of a solution. Muriatic acid and sodium bisulfate are examples of pH decreasers. Muriatic acid (or a substitute product) has the additional benefit of lowering alkalinity. Keep in mind that sodium bisulfate has the potential to raise alkalinity.

An alkalinity increaser: Because alkalinity and pH are closely connected, altering the pH levels of your hot tub may also have an influence on alkalinity levels. If you need to elevate the alkalinity of your hot tub, you may do it with the help of an alkalinity enhancer.

Use either chlorine or a non-chlorine treatment that breaks down organic compounds in the water while also converting chloramines back into the active form of chlorine as a shock agent.

Chlorine and bromine are the most widely used sanitizers in the United States. Bromine is occasionally prescribed for those who have very sensitive skin. Other sanitizing options for your hot tub include biguanide (a chemical sanitizer that is non-chlorine and non-bromine), a salt system, and an ozone generator, among others.

Addition to increase calcium hardness or reduce calcium hardness: Depending on the hardness of your water, you may need an additive to either increase or decrease the quantity of calcium in your hot tub water. As a result, you will have cleaner water while also extending the life of mechanical components in your system.

Enzymes: While not a strictly necessary ingredient for your hot tub, enzymes may assist to reduce the formation of hot tub scum by a significant amount.

a specific cleaning mixture that aids in the removal of dirt and buildup from the filter, therefore increasing its service life. Use it every three to four months when you clean out your hot tub and give it a thorough cleaning.

What is the average lifespan of a hot tub?

A hot tub will typically last between 10 and 15 years, depending on how often you use it. The quality of the construction, the frequency with which it is maintained, and the surrounding environment may all have an impact on the longevity of a hot tub. The failure or wear out of certain components may be repaired or replaced with newer models. If the expense of repairing the tub surpasses the worth of the tub itself, it may be necessary to replace the complete hot tub with another one.

The projected lifetime of inflatable hot tubs is much less than for conventional hot tubs. If you take exceptional care of the tub and its components, you may expect it to last around five years. However, it may need to be replaced after just a few seasons of usage if you do not take good care of it. However, since the purchasing price of an inflatable hot tub is often less than half the cost of a hard-side hot tub, the shorter lifetime is justified.

Summary

It is possible to choose from a variety of hot tub models, based on your installation alternatives and financial constraints. In-ground hot tubs are typically built adjacent to or close to an in-ground swimming pool. The dimensions and seating capacity of a hot tub define the overall size of the tub. If you have limited space or have a certain location in mind for your hot tub installation, thoroughly examine the dimensions of any model you are considering. Fiberglass, acrylic, and polyethylene are popular materials used in the construction of portable hot tubs.

A hot tub cover is often mentioned as an optional feature but is more often than not regarded a must-have in the end. Options differ from manufacturer to manufacturer and model to model, but they can all help to improve the comfort and ambiance of your hot tub experience. If you have an inflatable hot tub, you should take additional precautions to ensure that there are no things on the ground that might puncture the lining of the tub. Cleaning the hot tub using a moderate, nonabrasive solution is recommended. Draining and cleaning your hot tub once every three to four months is generally advised.

Chlorine and bromine are the most widely used hot tub sanitizers in the United States. Other sanitizing options for your hot tub include biguanide (a chemical sanitizer that is non-chlorine and non-bromine) and a salt system. Depending on the hardness of your water, you may need an additive to increase or decrease the quantity of calcium in your water. A hot tub will typically last between 10 and 15 years, depending on how often you use it. The failure or wear out of certain components may be repaired or replaced with newer models. If the expense of repairing the tub surpasses the worth of the tub itself, it may be necessary to replace the complete hot tub with another one.

Leave a Comment

Your email address will not be published.

Scroll to Top