Low-Flow Titanium Heater w/Sensors for Hot Spring/Watkins/Tiger River/Limelight Hot Tub Spa No-Fault 6kW

Brand: LA

Details: Laings Titanium Heater 1.5kW/6kW. This Heater comes from Laing made for Watkins and is an after market part. This PDR Titanium Heater is the newest factory upgrade replacement that comes with both sensors pre installed. So no need to worry about accidentally breaking the old sensors, plus they are brand new and updated. Its double-pass sleek design replaces all previously discontinued heater styles. The double-pass feature efficiently heats the water in two stages. Approved for all 115 volt 1.5kW and 230 volt – 6kW installations for all 1995-now Hot Springs and Tiger River spa models. Your existing 3/4″ vinyl tubing will attach to this heater with no needed adjustments. This replacement heater doesn’t have a plug on the end of the power cord like on the 1995-1996 spas. In most applications, the heater is connected directly inside the spas control box. If your existing heater plugs in to the bottom of your control box, you may need the appropriate adapter. Note#1: This PDR (power-down-reset) heater eliminates the manual reset button, which means that you never need to remove the equipment door to reset the heater. Simply power down the spa for 30 seconds by either tripping off the GFCI breakers in the sub panel (on 230volt models) or unplugging the spa (115volt models). This heater replaces all heaters in all 1995-now Hot Spring, Tiger River and Limelight hot tubs. Not a replacement for the 4kw heater similar to this. If heater is dry started you will have to reset the power in order to reset the internal pressure switch. Power down the spa to reset this safety switch. If you spa has a low flow issue this heater will turn itself off. Most issue with the heater are due to a flow issue. Please insure good water flow through the circ pump and filters.

UPC: 817147002015