iPower 19″ Bud Leaf Bowl Trimmer Machine Twisted Sharp Stainless Steel Spin Cut with Upgraded Gears, and Foldable Hanging Herb Mesh Rack with Zippers, 19′ 4L, for Hydroponic Plant, 2ft 4-Layer

$159.99

The bowl trimmer save your half trimming time. Crystal dome to see your product & with inverted cutter blades which are removable from the top. Any project a snap when looking to collect leaves from your plants. Flower trimmer operating instruction: 1. Remove the top from the flower trimmer’s base remove the top from the flower trimmer’s base. The inside of the top contains the high-density rubber tongues that are used to push the plant leaves into the blade grill. The cutting blades or wires are located below the grill. 2. Place the untrimmed plants on the grill place the untrimmed plants on top of the grill. The plants should be many to make sure the grill surface is covered(approximately 40 dry). 3. Place the top & handle back on the base Place the top & handle back on the top of the trimmer’s base. 4. Turn the handle clockwise about 15-30 Rounds using the handle, make 15-30 Complete turns, while spinning the handle, The inside rubber twist tongues multiplies the rate of the spinning plants & blades by over 30 times. A combination of the rubber tongues presses & rolls The plants into the spinning blades can improve the cutting efficiency. Only 30 S can yield one hour’s work. 5. Remove the top & collect the plant open the top & Trimmed plants & their fragmental bud/leaves can be found individually on the middle grill & in the trimmer basin. Depending on the type of plants, the trimming can be used for the preparation of plants’ Essential oils. 6. Repeat the process for more harvest if you think the leavepiece are not small enough, keep repeating the Above process as many times as you want, or until you have completed your harvest. When finished, easy clean every part of the trimmer & store it.

SKU: 840166228517 Category: Tags: , ,

Brand: iPower

Color: for Hydroponic Plant, 2ft 4-Layer

Features:

  • Function: Trimmer and dry rack combo for spinning cut twigs from plants, hanging dry with the net rack afterwards. For projects like making essential oils, aromatherapy products, and potpourris. Specially designed for indoor hydroponics
  • Powerful blades: Harness the power of 30 scissors in 1 cutter to provide clean & efficient while minimizing damage to plants. The four-edged blade for wet trimming and serrated blade and stainless-steel wire X blades for dry trimming
  • Visual cutting: Clear PC cover of high transparency ensures total visibility for precise trim. Dual-direction manual rotation clockwise/anti-clockwise, removable handle and replaceable blades, easy to use and clean
  • Drying rack: 24’’ diameter, 4-layers, about 8’’ height for each layer. High quality breathable dese nylon mesh, water-resistant top material. Zippered design allows easy operation, safe in strong wind. Clean, protect the plant from birds or fliers
  • Package includes: PC transparent cover, 24 black rubber strip and black rubber ring, stainless steel mesh and 19’’ basin, 4 rubber column, 1 serrated & 1 straight blade for dry & wet trim, 1 scissors, drying rack, free hanging hook and a storage bag

Details: The bowl trimmer save your half trimming time.
Crystal dome to see your product & with inverted cutter blades which are removable from the top. Any project a snap when looking to collect leaves from your plants.

Flower trimmer operating instruction:

1. Remove the top from the flower trimmer’s base remove the top from the flower trimmer’s base. The inside of the top contains the high-density rubber tongues that are used to push the plant leaves into the blade grill. The cutting blades or wires are located below the grill.

2. Place the untrimmed plants on the grill place the untrimmed plants on top of the grill. The plants should be many to make sure the grill surface is covered(approximately 40 dry).

3. Place the top & handle back on the base Place the top & handle back on the top of the trimmer’s base.

4. Turn the handle clockwise about 15-30 Rounds using the handle, make 15-30 Complete turns, while spinning the handle, The inside rubber twist tongues multiplies the rate of the spinning plants & blades by over 30 times. A combination of the rubber tongues presses & rolls The plants into the spinning blades can improve the cutting efficiency. Only 30 S can yield one hour’s work.

5. Remove the top & collect the plant open the top & Trimmed plants & their fragmental bud/leaves can be found individually on the middle grill & in the trimmer basin. Depending on the type of plants, the trimming can be used for the preparation of plants’ Essential oils.

6. Repeat the process for more harvest if you think the leavepiece are not small enough, keep repeating the Above process as many times as you want, or until you have completed your harvest. When finished, easy clean every part of the trimmer & store it.

UPC: 840166228517

Reviews

There are no reviews yet.

Be the first to review “iPower 19″ Bud Leaf Bowl Trimmer Machine Twisted Sharp Stainless Steel Spin Cut with Upgraded Gears, and Foldable Hanging Herb Mesh Rack with Zippers, 19′ 4L, for Hydroponic Plant, 2ft 4-Layer”

Your email address will not be published. Required fields are marked *

Scroll to Top