300 kBTU Titanium Shell and Tube Heat Exchanger for Salt Water Swimming Pool, Solar, Spa, Marine applications

$815.00

This type of heat exchanger is used to heat a Swimming Pool or Spa from any Hydronic system such as an outdoor furnace. It can also be used in conjunction with an existing gas, propane or oil fired boiler. Specifically, it is used to keep the pool and boiler water separate while providing an efficient means to transfer heat between the two systems. This model can be used for up to a 25,800 gallon pool at a 1°F/hour heat up rate. These heat exchangers can also be used in traditional indoor boilers, geothermal, solar, biodiesel, and other industrial/manufacturing applications. Features: Constructed with corrugated tubes for optimal efficiency Less expensive, more durable, and easier to install than brazed plate heat exchangers Designed to perform at high fluid velocities with low pressure drops Complete welded construction ensuring strength and durability Due to high flow rates through the exchanger, it is inherently self cleaning Product Data: Constructed using all Titanium Output: 300,000 BTU/hr Boiler (Tube) Side: 1-1/2″ FNPT Fittings Pool (Shell) Side: 2″ FNPT Fittings Shell side ports on same side for easiest installation Units with opposing side ports are also available For occasional (weekend & holidays) use we recommend a 2x multiplier to obtain a 2°F/hr heat up rate Covered by a Limited Lifetime Warranty against manufacturers defects

Category: Tag:

Brand: Brazetek

Features:

  • Capable of up to 360,000 BTU/hr heat transfer
  • Titanium construction perfect for chlorine or salt water pools and spas
  • Use with solar collectors or conventional boilers for heat supply
  • Tube Side Connections (Straight-Through/Boiler or heat source): 1-1/2″ FNPT
  • Shell Side Connections (Side Outlets/Pool): 2″ FNPT

Details: This type of heat exchanger is used to heat a Swimming Pool or Spa from any Hydronic system such as an outdoor furnace. It can also be used in conjunction with an existing gas, propane or oil fired boiler. Specifically, it is used to keep the pool and boiler water separate while providing an efficient means to transfer heat between the two systems. This model can be used for up to a 25,800 gallon pool at a 1°F/hour heat up rate. These heat exchangers can also be used in traditional indoor boilers, geothermal, solar, biodiesel, and other industrial/manufacturing applications.

Features:
Constructed with corrugated tubes for optimal efficiency
Less expensive, more durable, and easier to install than brazed plate heat exchangers
Designed to perform at high fluid velocities with low pressure drops
Complete welded construction ensuring strength and durability
Due to high flow rates through the exchanger, it is inherently self cleaning

Product Data:
Constructed using all Titanium
Output: 300,000 BTU/hr
Boiler (Tube) Side: 1-1/2″ FNPT Fittings
Pool (Shell) Side: 2″ FNPT Fittings
Shell side ports on same side for easiest installation
Units with opposing side ports are also available
For occasional (weekend & holidays) use we recommend a 2x multiplier to obtain a 2°F/hr heat up rate
Covered by a Limited Lifetime Warranty against manufacturers defects

Reviews

There are no reviews yet.

Be the first to review “300 kBTU Titanium Shell and Tube Heat Exchanger for Salt Water Swimming Pool, Solar, Spa, Marine applications”

Your email address will not be published.

Scroll to Top