A hot tub weighs around 450 pounds. Is it possible to move it on your own?

In the event that you’re contemplating moving your hot tub, you could be asking how to transport your hot tub from point A to point B.

Another possibility is that you’re wondering whether or not your new hot tub can be securely installed on an outside deck, or whether or not you actually need to strengthen that concrete slab.

So, how much does a hot tub weigh in terms of pounds?

The real answer will be dependent on the size and kind of spa, as well as the number of people that may be utilizing it at the same time.

People vs. Dry Weight vs. Filled Weight

In general, a modest two-to-three-person hot tub will weigh around 500 pounds when empty and close to 3000 pounds when filled with water, depending on the manufacturer.

If your spa is of a considerably greater size, such as a nine- or ten-person model, the dry weight will be in the range of 900-1250 pounds, with the capacity to hold up to 8000 pounds when fully stocked with water.

Here is a chart that shows estimated weights for spas of various sizes. These are are preliminary estimations, so be sure to verify individual spa models for precise weights before making your purchase.

SizeDry Weight (lbs)Water Weight (lbs)Max People Weight (lbs)Total Weight (lbs)
Small (2-3 People)4003,0006004,000
Medium (4-6 People)6004,75012006,500
Large (7-8 People)9008,000140010,000
Hot Tub Weight (Dry vs Water vs People)

Why might the weight of your hot tub be important to you?

When it comes to deck, concrete, or ground installation, you will need to account for the usual weight of the spa so that you are certain that your area will be able to hold it.

When planning to relocate or install your spa, be sure you are aware of the weight restrictions. This will help to guarantee that you, the spa, and your property are all safeguarded from harm.

It is important to have a strong foundation.

It is probable that the total full weight of a ten-person spa will be closer to 3000 pounds if you acquire one. In most circumstances, this amount of weight is too much for a normal wood or vinyl deck to support. Unless your deck area has been particularly constructed to withstand that amount of weight, it may be susceptible to collapse.

This is also true for concrete slabs that are smaller and thinner in thickness. We recommend that you employ a professional to pour or strengthen the concrete where your hot tub will be installed, simply to be completely certain that your spa will be a safe haven for everyone who enters it throughout its operation. Construction of concrete foundations should be reinforced with either rebar or mesh to a minimum thickness of 4 inches (10.16 centimeters). It is necessary to connect the rebar or mesh to a bond wire in order to provide electrical grounding.

Putting your spa on leveled ground rather than laying concrete may seem like a more convenient option, but bear in mind that flat earth may give way or sink, particularly when considering weather conditions and the possibility of water splashing from the bath itself. It is possible to build a strong foundation for your spa out of concrete pavers/bricks, pea gravel, or crushed rock; nevertheless, we do not advocate putting your spa directly on soil or grass.

Due to the fact that not all flat ground is created equal, it is recommended that you contact a professional contractor and your local dealer about placement choices before having your hot tub delivered or relocated.

Is It Possible to Move a Hot Tub on Your Own?

This, once again, is dependent on the size of your hot tub as well as the equipment and labor that you have at your disposal. Anything is doable with the correct personnel and equipment; nonetheless, it is always better to enlist the assistance of specialists for the relocation, delivery, and installation of your spa. Typically, a dolly or slide sheet is used to transport a spa, but a crane may be necessary to install the spa by raising it to its ultimate position. When transporting a spa, never allow the weight to be supported by the equipment door or front panel.

Furthermore, we recommend that you verify the warranty on your spa to ensure that transporting it yourself would not breach a still-valid guarantee.

Although it is theoretically feasible for you to relocate your spa by yourself, it is always best to check with your local spa dealer to explore your choices for moving or installing your spa in a new location before taking the plunge yourself.

Summary

How much does a hot tub weigh in pounds? The answer is dependent on the size and kind of spa, as well as the number of people using it. A two-to-three-person spa will weigh around 500 pounds when empty and close to 3000 pounds when filled with water. Putting your spa on leveled ground rather than laying concrete may seem like a more convenient option, but bear in mind that flat earth may give way or sink. It is possible to build a strong foundation for your spa out of concrete pavers/bricks, pea gravel, or crushed rock.

Leave a Comment

Your email address will not be published.

Scroll to Top